Banana Pi board

Brand: Banana Pi
Product Code: Banana Pi Board
Availability: In Stock

Available Options


* Power Adapter:
* HDMI Length and Type:

* SD Card:

Ex VAT: £26.63
Inc. VAT £31.95
Qty:     - OR -   Add to Wish List
Add to Compare
Banana Pi board
Banana Pi board Banana Pi board Banana Pi board Banana Pi board Banana Pi board Banana Pi board Banana Pi board Banana Pi board

What's Banana Pi?

The Banana Pi is an open-source single-board computer. It can run Android 4.4, Ubuntu, Debian, as well as the Cubieboard Image. It uses the AllWinner A20 SoC, and has 1GB DDR3 SDRAM
The A20 processor and RAM chips are mounted on the reverse side of the board.

Specifications

  •     SoC: Allwinner A20
    •     CPU: ARM Cortex-A7 dual core
    •     GPU: ARM Mali400MP2 dual GPU core
    •     Video acceleration: CedarX
    •      Display controller: Allwinner A20 built-in, supports HDMI 1080p and CVBS
  •     1GB DDR3 RAM
  •     SD slot (maximum 64GB),
  •     7-pin SATA data port (with a separate power connector), supporting maximum 4 TB hard drive.
  •     10/100/1000 Ethernet connector, with LEDs.
  •     2x USB 2.0 host, 1x USB OTG, 1x CSI camera connector.
  •     26 extended pins including I²C, SPI, UART, CAN bus
  •     Power and reset switches mounted on board
  •     One user-defined LED on board
  •     Onboard IR receiver
  •     Microphone in
  •     Ø3.5mm audio Jack
  •     Expects 5V/2A source connected to the microUSB connector.
  •     Dimensions: 9.2cm × 6cm; (The board size of Banana Pi is a little bigger than Raspberry Pi)

Accessories: A range of fully tested accessories are also available.

Operating System
Family Linux
Version Ubuntu and other Linux distributions available
CPU
Clock Speed Dual core 1.0GHz
Model AllWinnerTech SOC A20,ARM Cortex-A7 Dual-Core
ARM Version 7
RAM
Capacity 1Gb
Type DDR3
Networking
Ethernet 1 x 10/100/1000
Graphics
GPU Mali400mp2, OpenGL ES 2.0/1.1
External Connectivity
SD Card SDHC
USB 2 x 2.0, 1 x USB OTG
eSATA 1 x 2.0 = 3Gbps SATAII
Audio Output 3.5mm jack
Video Output HDMI, CVBS , LVDS/RGB
Other Features
List: GPIO (2x13), UART, I2C bus, SPI bus with two chip selects, CAN bus, ADC,PWM, +3.3v,+5v, ground. Reset button, Power button, CSI input.
Power
Power Requirements 100-240VAC/50-60Hz 0.18W
Power Consumption 5V at 1700mA