Hello !
i tried to setup my Gurplug+ in wlan Client mode. (
http://plugcomputer.org/plugwiki/index.php/Setting_GuruPlug_to_be_a_WiFi_Client )
It should be enabled by default on every startup of the guru
I commented inital_setup.sh in teh rc.local.
I won't use the script wlan.sh.
Every Time the guru start, i can't enable the Wlaninterface "wlan0", because there is no driver. So i rmmod uapxxxx and modprobe sd86.... but it wont work.
Here the error messages:
guruplug-debian:~# ifup wlan0
ioctl[SIOCGIFFLAGS]: No such device
Could not get interface 'wlan0' flags
ioctl[SIOCSIWPMKSA]: No such device
ioctl[SIOCSIWMODE]: No such device
Could not configure driver to use managed mode
ioctl[SIOCGIWRANGE]: No such device
ioctl[SIOCGIFINDEX]: No such device
ioctl[SIOCSIWENCODEEXT]: No such device
ioctl[SIOCSIWENCODE]: No such device
ioctl[SIOCSIWENCODEEXT]: No such device
ioctl[SIOCSIWENCODE]: No such device
ioctl[SIOCSIWENCODEEXT]: No such device
ioctl[SIOCSIWENCODE]: No such device
ioctl[SIOCSIWENCODEEXT]: No such device
ioctl[SIOCSIWENCODE]: No such device
ioctl[SIOCSIWAP]: No such device
ioctl[SIOCGIFFLAGS]: No such device
wpa_supplicant: /sbin/wpa_supplicant daemon failed to start
run-parts: /etc/network/if-pre-up.d/wpasupplicant exited with return code 1
Internet Systems Consortium DHCP Client V3.1.1
Copyright 2004-2008 Internet Systems Consortium.
All rights reserved.
For info, please visit
http://www.isc.org/sw/dhcp/SIOCSIFADDR: No such device
wlan0: ERROR while getting interface flags: No such device
wlan0: ERROR while getting interface flags: No such device
Bind socket to interface: No such device
Failed to bring up wlan0.
Is there anyone with some usefull infos for me ?
Thanks!
