Marvell>> ide reset
Reset IDE:
Marvell Serial ATA Adapter
Integrated Sata device found
[0 1 0]: Enable DMA mode
Device 1 @ 0 1:
Model: WDC WD1600BEVS-22RST0 Firm: 04.01G04 Ser#: WD-WXC407056655
Type: Hard Disk
Supports 48-bit addressing
Capacity: 152627.8 MB = 149.0 GB (312581808 x 512)
Marvell>> run mmc_boot
SDHC found. Card desciption is:
Manufacturer: 0x27, OEM "PH"
Product name: "SD16G", revision 2.0
Serial number: 3850371503
Manufacturing date: 12/2008
CRC: 0x00, b0 = 0
5461109 bytes read
2706252 bytes read
## Booting image at 00800000 ...
Image Name: Linux-2.6.33.3
Created: 2010-04-27 21:07:33 UTC
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 2706188 Bytes = 2.6 MB
Load Address: 00008000
Entry Point: 00008000
Verifying Checksum ... OK
OK
## Loading Ramdisk Image at 01100000 ...
Image Name: Debian ramdisk 2.6.32-3-kirkwood
Created: 2010-05-08 23:20:15 UTC
Image Type: ARM Linux RAMDisk Image (gzip compressed)
Data Size: 5461045 Bytes = 5.2 MB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Starting kernel ...
Uncompressing Linux... done, booting the kernel.
Linux version 2.6.33.3 (kelly@speedy) (gcc version 4.4.3 (Sourcery G++ Lite er) ) #2 PREEMPT Tue Apr 27 15:07:28 MDT 2010
CPU: Feroceon 88FR131 [56251311] revision 1 (ARMv5TE), cr=00053177
CPU: VIVT data cache, VIVT instruction cache
Machine: Marvell SheevaPlug Reference Board
Memory policy: ECC disabled, Data cache writeback
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 130048
Kernel command line: console=ttyS0,115200n8 root=/dev/mmcblk0p2 rootdelay=0 rootfstype=ext3
PID hash table entries: 2048 (order: 1, 8192 bytes)
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 256MB 256MB = 512MB total
Memory: 508288KB available (4760K code, 863K data, 132K init, 0K highmem)
SLUB: Genslabs=11, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Hierarchical RCU implementation.
NR_IRQS:114
Console: colour dummy device 80x30
Calibrating delay loop... 1192.75 BogoMIPS (lpj=5963776)
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
NET: Registered protocol family 16
Kirkwood: MV88F6281-A0, TCLK=200000000.
Feroceon L2: Enabling L2
Feroceon L2: Cache support initialised.
bio: create slab <bio-0> at 0
vgaarb: loaded
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
cfg80211: Using static regulatory domain info
cfg80211: Regulatory domain: 00
(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
(2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
(2457000 KHz - 2482000 KHz @ 20000 KHz), (600 mBi, 2000 mBm)
(2474000 KHz - 2494000 KHz @ 20000 KHz), (600 mBi, 2000 mBm)
(5170000 KHz - 5250000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
(5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
cfg80211: Calling CRDA to update world regulatory domain
Switching to clocksource orion_clocksource
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
TCP established hash table entries: 16384 (order: 5, 131072 bytes)
TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
TCP reno registered
UDP hash table entries: 256 (order: 0, 4096 bytes)
UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
NET: Registered protocol family 1
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 5332K
JFFS2 version 2.2. (NAND) B) 2001-2006 Red Hat, Inc.
JFS: nTxBlock = 4014, nTxLock = 32116
msgmni has been set to 1003
alg: No test for stdrng (krng)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
serial8250.0: ttyS0 at MMIO 0xf1012000 (irq = 33) is a 16550A
console [ttyS0] enabled
brd: module loaded
loop: module loaded
NAND device: Manufacturer ID: 0xec, Chip ID: 0xdc (Samsung NAND 512MiB 3,3V 8-bit)
Scanning device for bad blocks
Bad eraseblock 960 at 0x000007800000
Bad eraseblock 961 at 0x000007820000
Bad eraseblock 1985 at 0x00000f820000
Creating 3 MTD partitions on "orion_nand":
0x000000000000-0x000000100000 : "u-boot"
0x000000100000-0x000000500000 : "uImage"
0x000000500000-0x000020000000 : "root"
MV-643xx 10/100/1000 ethernet driver version 1.4
mv643xx_eth smi: probed
net eth0: port 0 with MAC address 00:50:43:01:43:f2
libertas_sdio: Libertas SDIO driver
libertas_sdio: Copyright Pierre Ossman
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
orion-ehci orion-ehci.0: Marvell Orion EHCI
orion-ehci orion-ehci.0: new USB bus registered, assigned bus number 1
orion-ehci orion-ehci.0: irq 19, io mem 0xf1050000
orion-ehci orion-ehci.0: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usbcore: registered new interface driver ums-datafab
usbcore: registered new interface driver ums-freecom
usbcore: registered new interface driver ums-jumpshot
usbcore: registered new interface driver ums-sddr09
usbcore: registered new interface driver ums-sddr55
mice: PS/2 mouse device common for all mice
rtc-mv rtc-mv: rtc core: registered rtc-mv as rtc0
i2c /dev entries driver
cpuidle: using governor ladder
cpuidle: using governor menu
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
mmc0: mvsdio driver initialized, lacking card detect (fall back to polling)
Registered led device: plug:green:health
mv_xor_shared mv_xor_shared.0: Marvell shared XOR driver
mv_xor_shared mv_xor_shared.1: Marvell shared XOR driver
mv_xor mv_xor.0: Marvell XOR: ( xor cpy )
mmc0: host does not support reading read-only switch. assuming write-enable.
mmc0: new high speed SDHC card at address 0007
mmcblk0: mmc0:0007 SD16G 15.0 GiB
mmcblk0: p1 p2 p3
mv_xor mv_xor.1: Marvell XOR: ( xor fill cpy )
mv_xor mv_xor.2: Marvell XOR: ( xor cpy )
mv_xor mv_xor.3: Marvell XOR: ( xor fill cpy )
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
oprofile: using timer interrupt.
TCP cubic registered
NET: Registered protocol family 17
lib80211: common routines for IEEE802.11 drivers
rtc-mv rtc-mv: setting system clock to 2010-06-12 14:21:43 UTC (1276352503)
Freeing init memory: 132K
Loading, please wait...
usb 1-1: new high speed USB device using orion-ehci and address 2
WARNING: Couldn't open directory /lib/modules/2.6.33.3: No such file or directory
FATAL: Could not open /lib/modules/2.6.33.3/modules.dep.temp for writing: No such file or directory
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 4 ports detected
usb 1-1.1: new high speed USB device using orion-ehci and address 3
FATAL: Could not load /lib/modules/2.6.33.3/modules.dep: No such file or directory
Begin: Loading essential drivers ... FATAL: Could not load /lib/modules/2.6.33.3/modules.dep: No such file or directory
FATAL: Could not load /lib/modules/2.6.33.3/modules.dep: No such file or directory
FATAL: Could not load /lib/modules/2.6.33.3/modules.dep: No such file or directory
FATAL: Could not load /lib/modules/2.6.33.3/modules.dep: No such file or directory
done.
Begin: Running /scripts/init-premount ... done.
Begin: Mounting root file system ... Begin: Running /scripts/local-top ... scsi0 : usb-storage 1-1.1:1.0
done.
Begin: Running /scripts/local-premount ... done.
FATAL: Could not load /lib/modules/2.6.33.3/modules.dep: No such file or directory
EXT3-fs (mmcblk0p2): mounted filesystem with writeback data mode
kjournald starting. Commit interval 5 seconds
Begin: Running /scripts/local-bottom ... done.
done.
Begin: Running /scripts/init-bottom ... usb 1-1.2: new high speed USB device using orion-ehci and address 4
done.
hub 1-1.2:1.0: USB hub found
hub 1-1.2:1.0: 4 ports detected
INIT: version 2.86 booting
usb 1-1.2.1: new high speed USB device using orion-ehci and address 5
Starting the hotplug events dispatcher: udevdscsi1 : usb-storage 1-1.2.1:1.0
udev: starting version 153
usb 1-1.2.2: new high speed USB device using orion-ehci and address 6
.
Synthesizing the initial hotplug events...scsi2 : usb-storage 1-1.2.2:1.0
done.
sata_mv sata_mv.0: version 1.28
sata_mv sata_mv.0: slots 32 ports 2
Waiting for /dev to be fully populated...scsi3 : sata_mv
scsi4 : sata_mv
ata1: SATA max UDMA/133 irq 21
ata2: SATA max UDMA/133 irq 21
ata1: SATA link down (SStatus 0 SControl F300)
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl F300)
ata2.00: ATA-7: WDC WD1600BEVS-22RST0, 04.01G04, max UDMA/133
ata2.00: 312581808 sectors, multi 0: LBA48 NCQ (depth 31/32)
ata2.00: configured for UDMA/133
scsi 4:0:0:0: Direct-Access ATA WDC WD1600BEVS-2 04.0 PQ: 0 ANSI: 5
sd 4:0:0:0: Attached scsi generic sg0 type 0
sd 4:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
sd 4:0:0:0: [sda] Write Protect is off
sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3 < sda5 >
sd 4:0:0:0: [sda] Attached SCSI disk
done.
Setting parameters of disc: (none).
Activating swap...Adding 1068312k swap on /dev/mmcblk0p3. Priority:-1 extents:1 across:1068312k SS
done.
Checking root file system...fsck from util-linux-ng 2.16.2
e2fsck 1.41.11 (14-Mar-2010)
Squeeze-fs: clean, 36557/885952 files, 393666/3542332 blocks
done.
EXT3-fs (mmcblk0p2): using internal journal
Cleaning up ifupdown....
Loading kernel modules...done.
Activating lvm and md swap...done.
Checking file systems...fsck from util-linux-ng 2.16.2
e2fsck 1.41.11 (14-Mar-2010)
Squeeze-boot: clean, 25/257040 files, 62008/514048 blocks
done.
Setting up networking...scsi 0:0:0:0: Direct-Access ST332082 0AS PQ: 0 ANSI: 2 CCS
sd 0:0:0:0: Attached scsi generic sg1 type 0
sd 0:0:0:0: [sdb] 625142448 512-byte logical blocks: (320 GB/298 GiB)
.
sd 0:0:0:0: [sdb] Write Protect is off
sd 0:0:0:0: [sdb] Assuming drive cache: write through
sd 0:0:0:0: [sdb] Assuming drive cache: write through
sdb:Mounting local filesystems... sdb1 sdb2 sdb3 sdb4
sd 0:0:0:0: [sdb] Assuming drive cache: write through
sd 0:0:0:0: [sdb] Attached SCSI disk
scsi 1:0:0:0: Direct-Access Iomega E xternal HD 0000 PQ: 0 ANSI: 4
sd 1:0:0:0: Attached scsi generic sg2 type 0
sd 1:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 1:0:0:0: [sdc] Write Protect is off
sd 1:0:0:0: [sdc] Assuming drive cache: write through
sd 1:0:0:0: [sdc] Assuming drive cache: write through
sdc:
scsi 2:0:0:0: Direct-Access ST332082 0AS PQ: 0 ANSI: 2 CCS
sd 2:0:0:0: Attached scsi generic sg3 type 0
sd 2:0:0:0: [sdd] 625142448 512-byte logical blocks: (320 GB/298 GiB)
sd 2:0:0:0: [sdd] Write Protect is off
sd 2:0:0:0: [sdd] Assuming drive cache: write through
sd 2:0:0:0: [sdd] Assuming drive cache: write through
sdd:done.
Activating swapfile swap...done.
Cleaning up temporary files....
Configuring network interfaces...done.
Setting kernel variables ...error: "net.ipv6.bindv6only" is an unknown key
failed.
Starting portmap daemon....
Starting NFS common utilities: statd sdd1 sdd2 sdd3 < sdd5 >
sd 2:0:0:0: [sdd] Assuming drive cache: write through
sd 2:0:0:0: [sdd] Attached SCSI disk
sdc1 sdc2
sd 1:0:0:0: [sdc] Assuming drive cache: write through
sd 1:0:0:0: [sdc] Attached SCSI disk
eth0: link up, 100 Mb/s, full duplex, flow control disabled
Installing knfsd (copyright (C) 1996
okir@monad.swb.de).
idmapd.
Cleaning up temporary files....
fuse init (API version 7.13)
INIT: Entering runlevel: 2
Starting enhanced syslogd: rsyslogd.
Starting Samba daemons: nmbd smbdNET: Registered protocol family 10
.
Starting web server: apache2.
Starting deferred execution scheduler: atd.
Starting periodic command scheduler: cron.
Starting system message bus: dbus.
Starting MySQL database server: mysqld ..
Checking for corrupt, not cleanly closed and upgrade needing tables..
Starting OpenBSD Secure Shell server: sshd.
Starting HPA's tftpd: in.tftpd.
Starting FTP server: vsftpd.
Starting the Winbind daemon: winbind.
Starting MTA: exim4.
Starting portmap daemon...Already running..
Starting NFS common utilities: statd idmapd.
Exporting directories for NFS kernel daemon...exportfs: /etc/exports [1]: Neither 'subtree_check' or 'no_subtree_check' specified for export "192.168.0.0/255.255.255.0:/media/usb1/".
Assuming default behaviour ('no_subtree_check').
NOTE: this default has changed since nfs-utils version 1.0.x
.
Starting NFS kernel daemon: nfsdsvc: failed to register lockdv1 RPC service (errno 97).
NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
NFSD: starting 90-second grace period
mountd.
Debian GNU/Linux squeeze/sid sheeva ttyS0
sheeva login: root
Password:
Last login: Mon Jun 7 04:43:30 BST 2010 on ttyS0
Linux sheeva 2.6.33.3 #2 PREEMPT Tue Apr 27 15:07:28 MDT 2010 armv5tel
The programs included with the Debian GNU/Linux system are free software;
the exact distribution terms for each program are described in the
individual files in /usr/share/doc/*/copyright.
Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
permitted by applicable law.
root@sheeva:~# ls /dev/sd?
/dev/sda /dev/sdb /dev/sdc /dev/sdd
root@sheeva:~# fdisk -l
Disk /dev/mmcblk0: 16.1 GB, 16135487488 bytes
255 heads, 63 sectors/track, 1961 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x0009825d
Device Boot Start End Blocks Id System
/dev/mmcblk0p1 * 1 64 514048+ 83 Linux
/dev/mmcblk0p2 65 1828 14169330 83 Linux
/dev/mmcblk0p3 1829 1961 1068322+ 82 Linux swap / Solaris
Disk /dev/sda: 160.0 GB, 160041885696 bytes
255 heads, 63 sectors/track, 19457 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x0005f19a
Device Boot Start End Blocks Id System
/dev/sda1 1 16889 135660861 7 HPFS/NTFS
/dev/sda2 16890 19385 20049120 83 Linux
/dev/sda3 19386 19457 578340 5 Extended
/dev/sda5 19386 19457 578308+ 82 Linux swap / Solaris
Disk /dev/sdb: 320.1 GB, 320072933376 bytes
255 heads, 63 sectors/track, 38913 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x27218b8d
Device Boot Start End Blocks Id System
/dev/sdb1 * 1 64 514048+ 83 Linux
/dev/sdb2 65 3723 29390917+ 83 Linux
/dev/sdb3 3724 3852 1036192+ 82 Linux swap / Solaris
/dev/sdb4 3853 38913 281627482+ 83 Linux
Disk /dev/sdc: 1000.2 GB, 1000204886016 bytes
255 heads, 63 sectors/track, 121601 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0xcbce2081
Device Boot Start End Blocks Id System
/dev/sdc1 1 60800 488375968+ 83 Linux
/dev/sdc2 60801 121601 488384032+ 83 Linux
Disk /dev/sdd: 320.1 GB, 320072933376 bytes
255 heads, 63 sectors/track, 38913 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x2dd46207
Device Boot Start End Blocks Id System
/dev/sdd1 1 37201 298817001 83 Linux
/dev/sdd2 37665 38862 9622935 83 Linux
/dev/sdd3 38863 38913 409657+ 5 Extended
/dev/sdd5 38863 38913 409626 82 Linux swap / Solaris
root@sheeva:~#
