New IT forum Follow us on Twitter
21 May 2012, 05:58:43 pm *
Welcome, Guest. Please login or register.
Did you miss your activation email?

Login with username, password and session length
News: TonidoPlug2 - Now in stock!
 
   Home   SHOP Help Search Login Register  
New IT forum > SheevaPlug > For beginners > Malfunctioning hardware?
Pages: [1]
« previous next »
  Print  
Author Topic: Malfunctioning hardware?  (Read 1017 times)
alvi
Newbie
*
Posts: 2
« on: 22 August 2011, 04:44:09 pm »
I got a Sheevaplug with e-SATA and an 8GB SD card, running debian from the SD card, bought from NewIT in May but seldom used until now.

1) On boot, I get multiple messages about bad eraseblock on NAND device, and, little later, about errors on mtdblock devices:

NAND device: Manufacturer ID: 0xad, Chip ID: 0xdc (Hynix NAND 512MiB 3,3V 8-bit)
Scanning device for bad blocks
Bad eraseblock 1472 at 0x00000b800000
Bad eraseblock 1662 at 0x00000cfc0000
Bad eraseblock 1908 at 0x00000ee80000
Bad eraseblock 1934 at 0x00000f1c0000
Bad eraseblock 1936 at 0x00000f200000
Bad eraseblock 1952 at 0x00000f400000
Bad eraseblock 1953 at 0x00000f420000
Bad eraseblock 2003 at 0x00000fa60000
Bad eraseblock 2213 at 0x0000114a0000
Bad eraseblock 2356 at 0x000012680000
Bad eraseblock 2628 at 0x000014880000
Bad eraseblock 2875 at 0x000016760000
Bad eraseblock 3023 at 0x0000179e0000
Bad eraseblock 3365 at 0x00001a4a0000
Bad eraseblock 3552 at 0x00001bc00000
Bad eraseblock 3618 at 0x00001c440000

<< OK, the following have been reported previously and the answer was they are normal.  >>
uncorrectable error :
uncorrectable error :
end_request: I/O error, dev mtdblock0, sector 0
Buffer I/O error on device mtdblock0, logical block 0
uncorrectable error :
uncorrectable error :
end_request: I/O error, dev mtdblock0, sector 8
Buffer I/O error on device mtdblock0, logical block 1
uncorrectable error :
uncorrectable error :
end_request: I/O error, dev mtdblock0, sector 16
Buffer I/O error on device mtdblock0, logical block 2
uncorrectable error :
uncorrectable error :
end_request: I/O error, dev mtdblock0, sector 24
Buffer I/O error on device mtdblock0, logical block 3


The system completes booting more or less normally, but these diagnostics look suspicious. Can anyone provide advice?

2) fdisk -l reports that mtdblock1 and mtdblock2 are don't contain a valid partition table. Is this expected?

3) Again to booting sequence:it says it has problems with e-SATA:

ata2: exception Emask 0x10 SAct 0x0 SErr 0x180000 action 0x6 frozen
ata2: edma_err_cause=00000020 pp_flags=00000003, SError=00180000
ata2: SError: { 10B8B Dispar }
ata2: hard resetting link
ata2: SATA link down (SStatus 0 SControl F300)
ata2: hard resetting link
ata2: SATA link down (SStatus 0 SControl F300)
ata2: limiting SATA link speed to 1.5 Gbps <<<<<
ata2: hard resetting link
ata2: SATA link down (SStatus 0 SControl F310)
ata2.00: disabled
ata2: EH complete
ata2.00: detaching (SCSI 1:0:0:0)

When the boot completes, the eSata disk is visible to fdisk (formatted and works. Performance to be measured).
Still, that sentence 'limiting SATA speed to 1.5 Gbps' looks disappointing.
(The esata disk is a 2TB Caviar Green in an IcyBox container.)

Again, someone can provide advice?
Thanks
Alvise Nobile
« Last Edit: 23 August 2011, 03:46:48 pm by alvi » Logged
ccd2011
Newbie
*
Posts: 1


WWW
« Reply #1 on: 28 August 2011, 01:32:24 am »
Quote from: alvi on 22 August 2011, 04:44:09 pm
I got a Sheevaplug with e-SATA and an 8GB SD card, running debian from the SD card, bought from NewIT in May but seldom used until now.

1) On boot, I get multiple messages about bad eraseblock on NAND device, and, little later, about errors on mtdblock devices:

NAND device: Manufacturer ID: 0xad, Chip ID: 0xdc (Hynix NAND 512MiB 3,3V 8-bit)
Scanning device for bad blocks
Bad eraseblock 1472 at 0x00000b800000
Bad eraseblock 1662 at 0x00000cfc0000
Bad eraseblock 1908 at 0x00000ee80000
Bad eraseblock 1934 at 0x00000f1c0000
Bad eraseblock 1936 at 0x00000f200000
Bad eraseblock 1952 at 0x00000f400000
Bad eraseblock 1953 at 0x00000f420000
Bad eraseblock 2003 at 0x00000fa60000
Bad eraseblock 2213 at 0x0000114a0000
Bad eraseblock 2356 at 0x000012680000
Bad eraseblock 2628 at 0x000014880000
Bad eraseblock 2875 at 0x000016760000
Bad eraseblock 3023 at 0x0000179e0000
Bad eraseblock 3365 at 0x00001a4a0000
Bad eraseblock 3552 at 0x00001bc00000
Bad eraseblock 3618 at 0x00001c440000

<< OK, the following have been reported previously and the answer was they are normal.  >>
uncorrectable error :
uncorrectable error :
end_request: I/O error, dev mtdblock0, sector 0
Buffer I/O error on device mtdblock0, logical block 0
uncorrectable error :
uncorrectable error :
end_request: I/O error, dev mtdblock0, sector 8
Buffer I/O error on device mtdblock0, logical block 1
uncorrectable error :
uncorrectable error :
end_request: I/O error, dev mtdblock0, sector 16
Buffer I/O error on device mtdblock0, logical block 2
uncorrectable error :
uncorrectable error :
end_request: I/O error, dev mtdblock0, sector 24
Buffer I/O error on device mtdblock0, logical block 3


The system completes booting more or less normally, but these diagnostics look suspicious. Can anyone provide advice?

2) fdisk -l reports that mtdblock1 and mtdblock2 are don't contain a valid partition table. Is this expected?

3) Again to booting sequence:it says it has problems with e-SATA:

ata2: exception Emask 0x10 SAct 0x0 SErr 0x180000 action 0x6 frozen
ata2: edma_err_cause=00000020 pp_flags=00000003, SError=00180000
ata2: SError: { 10B8B Dispar }
ata2: hard resetting link
ata2: SATA link down (SStatus 0 SControl F300)
ata2: hard resetting link
ata2: SATA link down (SStatus 0 SControl F300)
ata2: limiting SATA link speed to 1.5 Gbps <<<<<
ata2: hard resetting link
ata2: SATA link down (SStatus 0 SControl F310)
ata2.00: disabled
ata2: EH complete
ata2.00: detaching (SCSI 1:0:0:0)

When the boot completes, the eSata disk is visible to fdisk (formatted and works. Performance to be measured).
Still, that sentence 'limiting SATA speed to 1.5 Gbps' looks disappointing.
(The esata disk is a 2TB Caviar Green in an IcyBox container.)

Again, someone can provide advice?
Thanks
Alvise Nobile



Alvi,

Glad you post it here. I am having this kind of error too. I hope someone will reply on this post and gives us some tips on how to solve it. Thank you!
Logged
Crowd Control Ropes
Retractable Line Divider
Crowd Dividers
Confusticated
New IT customer
Hero Member
*
Posts: 511
« Reply #2 on: 28 August 2011, 07:40:52 pm »
Does the kernel version you are using have known SATA issues ?

NB. It is not good netiquette to quote the whole previous post, it conveys no extra useful information to read it twice.
Logged
Advocatus Diaboli - My agenda is not to give you the answer, but to guide your thoughts so you derive it for yourself!
alvi
Newbie
*
Posts: 2
« Reply #3 on: 29 August 2011, 02:43:35 pm »
My kernel knows about esata and in fact esata is working correctly. But the message about speed reduction is there
Alvise
Logged
aleandro
Newbie
*
Posts: 11
« Reply #4 on: 21 December 2011, 12:16:30 pm »
Code:

Dec 21 09:25:59 stazione kernel: imklog 4.6.4, log source = /proc/kmsg started.
Dec 21 09:25:59 stazione kernel: [    0.000000] Initializing cgroup subsys cpuset
Dec 21 09:25:59 stazione kernel: [    0.000000] Initializing cgroup subsys cpu
Dec 21 09:25:59 stazione kernel: [    0.000000] Linux version 2.6.32-5-kirkwood (Debian 2.6.32-39) (dannf@debian.org) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 Thu Nov 3 18:29:02 UTC 2011
Dec 21 09:25:59 stazione kernel: [    0.000000] CPU: Feroceon 88FR131 [56251311] revision 1 (ARMv5TE), cr=00053977
Dec 21 09:25:59 stazione kernel: [    0.000000] CPU: VIVT data cache, VIVT instruction cache
Dec 21 09:25:59 stazione kernel: [    0.000000] Machine: Marvell SheevaPlug Reference Board
Dec 21 09:25:59 stazione kernel: [    0.000000] Memory policy: ECC disabled, Data cache writeback
Dec 21 09:25:59 stazione kernel: [    0.000000] On node 0 totalpages: 131072
Dec 21 09:25:59 stazione kernel: [    0.000000] free_area_init_node: node 0, pgdat c03d50b4, node_mem_map c0d3a000
Dec 21 09:25:59 stazione kernel: [    0.000000]   Normal zone: 1024 pages used for memmap
Dec 21 09:25:59 stazione kernel: [    0.000000]   Normal zone: 0 pages reserved
Dec 21 09:25:59 stazione kernel: [    0.000000]   Normal zone: 130048 pages, LIFO batch:31
Dec 21 09:25:59 stazione kernel: [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 130048
Dec 21 09:25:59 stazione kernel: [    0.000000] Kernel command line: console=ttyS0,115200
Dec 21 09:25:59 stazione kernel: [    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
Dec 21 09:25:59 stazione kernel: [    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Dec 21 09:25:59 stazione kernel: [    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Dec 21 09:25:59 stazione kernel: [    0.000000] Memory: 256MB 256MB = 512MB total
Dec 21 09:25:59 stazione kernel: [    0.000000] Memory: 509696KB available (3516K code, 583K data, 124K init, 0K highmem)
Dec 21 09:25:59 stazione kernel: [    0.000000] SLUB: Genslabs=11, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Dec 21 09:25:59 stazione kernel: [    0.000000] Hierarchical RCU implementation.
Dec 21 09:25:59 stazione kernel: [    0.000000] NR_IRQS:114
Dec 21 09:25:59 stazione kernel: [    0.000000] Console: colour dummy device 80x30
Dec 21 09:25:59 stazione kernel: [   21.474960] Calibrating delay loop... 1192.75 BogoMIPS (lpj=5963776)
Dec 21 09:25:59 stazione kernel: [   21.714922] Security Framework initialized
Dec 21 09:25:59 stazione kernel: [   21.714941] SELinux:  Disabled at boot.
Dec 21 09:25:59 stazione kernel: [   21.714966] Mount-cache hash table entries: 512
Dec 21 09:25:59 stazione kernel: [   21.715257] Initializing cgroup subsys ns
Dec 21 09:25:59 stazione kernel: [   21.715272] Initializing cgroup subsys cpuacct
Dec 21 09:25:59 stazione kernel: [   21.715281] Initializing cgroup subsys devices
Dec 21 09:25:59 stazione kernel: [   21.715289] Initializing cgroup subsys freezer
Dec 21 09:25:59 stazione kernel: [   21.715297] Initializing cgroup subsys net_cls
Dec 21 09:25:59 stazione kernel: [   21.715351] CPU: Testing write buffer coherency: ok
Dec 21 09:25:59 stazione kernel: [   21.716065] devtmpfs: initialized
Dec 21 09:25:59 stazione kernel: [   21.717688] regulator: core version 0.5
Dec 21 09:25:59 stazione kernel: [   21.717895] NET: Registered protocol family 16
Dec 21 09:25:59 stazione kernel: [   21.718380] Kirkwood: MV88F6281-A1, TCLK=200000000.
Dec 21 09:25:59 stazione kernel: [   21.718393] Feroceon L2: Enabling L2
Dec 21 09:25:59 stazione kernel: [   21.718426] Feroceon L2: Cache support initialised.
Dec 21 09:25:59 stazione kernel: [   21.718841] initial MPP regs: 01111111 11113322 00001111 00100000 00000000 00000000 00000000
Dec 21 09:25:59 stazione kernel: [   21.718862]   final MPP regs: 01111111 11113322 00001111 00000000 00000000 00000000 00000000
Dec 21 09:25:59 stazione kernel: [   21.720260] bio: create slab <bio-0> at 0
Dec 21 09:25:59 stazione kernel: [   21.720522] vgaarb: loaded
Dec 21 09:25:59 stazione kernel: [   21.720968] Switching to clocksource orion_clocksource
Dec 21 09:25:59 stazione kernel: [   21.724746] NET: Registered protocol family 2
Dec 21 09:25:59 stazione kernel: [   21.725040] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
Dec 21 09:25:59 stazione kernel: [   21.725790] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
Dec 21 09:25:59 stazione kernel: [   21.726143] TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
Dec 21 09:25:59 stazione kernel: [   21.726323] TCP: Hash tables configured (established 16384 bind 16384)
Dec 21 09:25:59 stazione kernel: [   21.726332] TCP reno registered
Dec 21 09:25:59 stazione kernel: [   21.726481] NET: Registered protocol family 1
Dec 21 09:25:59 stazione kernel: [   21.726650] Unpacking initramfs...
Dec 21 09:25:59 stazione kernel: [   22.077614] Freeing initrd memory: 5348K
Dec 21 09:25:59 stazione kernel: [   22.077723] NetWinder Floating Point Emulator V0.97 (double precision)
Dec 21 09:25:59 stazione kernel: [   22.077967] audit: initializing netlink socket (disabled)
Dec 21 09:25:59 stazione kernel: [   22.078001] type=2000 audit(0.590:1): initialized
Dec 21 09:25:59 stazione kernel: [   22.084378] VFS: Disk quotas dquot_6.5.2
Dec 21 09:25:59 stazione kernel: [   22.084638] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Dec 21 09:25:59 stazione kernel: [   22.084728] JFFS2 version 2.2. (NAND) (SUMMARY)  © 2001-2006 Red Hat, Inc.
Dec 21 09:25:59 stazione kernel: [   22.085366] msgmni has been set to 1006
Dec 21 09:25:59 stazione kernel: [   22.086988] alg: No test for stdrng (krng)
Dec 21 09:25:59 stazione kernel: [   22.087103] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
Dec 21 09:25:59 stazione kernel: [   22.087115] io scheduler noop registered
Dec 21 09:25:59 stazione kernel: [   22.087122] io scheduler anticipatory registered
Dec 21 09:25:59 stazione kernel: [   22.087129] io scheduler deadline registered
Dec 21 09:25:59 stazione kernel: [   22.087306] io scheduler cfq registered (default)
Dec 21 09:25:59 stazione kernel: [   22.093266] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
Dec 21 09:25:59 stazione kernel: [   22.093718] serial8250.0: ttyS0 at MMIO 0xf1012000 (irq = 33) is a 16550A
Dec 21 09:25:59 stazione kernel: [   22.412680] console [ttyS0] enabled
Dec 21 09:25:59 stazione kernel: [   22.416736] NAND device: Manufacturer ID: 0xec, Chip ID: 0xdc (Samsung NAND 512MiB 3,3V 8-bit)
Dec 21 09:25:59 stazione kernel: [   22.425427] Scanning device for bad blocks
Dec 21 09:25:59 stazione kernel: [   22.466700] Bad eraseblock 1271 at 0x000009ee0000
Dec 21 09:25:59 stazione kernel: [   22.491240] Bad eraseblock 1949 at 0x00000f3a0000
Dec 21 09:25:59 stazione kernel: [   22.510129] Bad eraseblock 2434 at 0x000013040000
Dec 21 09:25:59 stazione kernel: [   22.563369] Creating 3 MTD partitions on "orion_nand":
Dec 21 09:25:59 stazione kernel: [   22.568541] 0x000000000000-0x000000100000 : "u-boot"
Dec 21 09:25:59 stazione kernel: [   22.574103] 0x000000100000-0x000000500000 : "uImage"
Dec 21 09:25:59 stazione kernel: [   22.579550] 0x000000500000-0x000020000000 : "root"
Dec 21 09:25:59 stazione kernel: [   22.585781] mice: PS/2 mouse device common for all mice
Dec 21 09:25:59 stazione kernel: [   22.591291] rtc-mv rtc-mv: rtc core: registered rtc-mv as rtc0
Dec 21 09:25:59 stazione kernel: [   22.597215] i2c /dev entries driver
Dec 21 09:25:59 stazione kernel: [   22.600911] cpuidle: using governor ladder
Dec 21 09:25:59 stazione kernel: [   22.605166] cpuidle: using governor menu
Dec 21 09:25:59 stazione kernel: [   22.609204] Registered led device: plug:green:health
Dec 21 09:25:59 stazione kernel: [   22.614259] mv_xor_shared mv_xor_shared.0: Marvell shared XOR driver
Dec 21 09:25:59 stazione kernel: [   22.620660] mv_xor_shared mv_xor_shared.1: Marvell shared XOR driver
Dec 21 09:25:59 stazione kernel: [   22.661030] mv_xor mv_xor.0: Marvell XOR: ( xor cpy )
Dec 21 09:25:59 stazione kernel: [   22.701026] mv_xor mv_xor.1: Marvell XOR: ( xor fill cpy )
Dec 21 09:25:59 stazione kernel: [   22.741027] mv_xor mv_xor.2: Marvell XOR: ( xor cpy )
Dec 21 09:25:59 stazione kernel: [   22.781026] mv_xor mv_xor.3: Marvell XOR: ( xor fill cpy )
Dec 21 09:25:59 stazione kernel: [   22.787690] TCP cubic registered
Dec 21 09:25:59 stazione kernel: [   22.790931] NET: Registered protocol family 17
Dec 21 09:25:59 stazione kernel: [   22.795426] Gating clock of unused units
Dec 21 09:25:59 stazione kernel: [   22.795434] before: 0x00c701dd
Dec 21 09:25:59 stazione kernel: [   22.795441]  after: 0x00c701d9
Dec 21 09:25:59 stazione kernel: [   22.795730] registered taskstats version 1
Dec 21 09:25:59 stazione kernel: [   22.800457] rtc-mv rtc-mv: setting system clock to 2011-12-21 08:25:46 UTC (1324455946)
Dec 21 09:25:59 stazione kernel: [   22.808570] Initalizing network drop monitor service
Dec 21 09:25:59 stazione kernel: [   22.813624] Freeing init memory: 124K
Dec 21 09:25:59 stazione kernel: [   22.891422] udev[44]: starting version 164
Dec 21 09:25:59 stazione kernel: [   23.205380] usbcore: registered new interface driver usbfs
Dec 21 09:25:59 stazione kernel: [   23.225460] mmc0: mvsdio driver initialized, lacking card detect (fall back to polling)
Dec 21 09:25:59 stazione kernel: [   23.233668] usbcore: registered new interface driver hub
Dec 21 09:25:59 stazione kernel: [   23.240635] usbcore: registered new device driver usb
Dec 21 09:25:59 stazione kernel: [   23.248324] MV-643xx 10/100/1000 ethernet driver version 1.4
Dec 21 09:25:59 stazione kernel: [   23.267187] mv643xx_eth smi: probed
Dec 21 09:25:59 stazione kernel: [   23.275434] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Dec 21 09:25:59 stazione kernel: [   23.290969] net eth0: port 0 with MAC address f0:ad:4e:00:05:4b
Dec 21 09:25:59 stazione kernel: [   23.297138] orion-ehci orion-ehci.0: Marvell Orion EHCI
Dec 21 09:25:59 stazione kernel: [   23.304646] orion-ehci orion-ehci.0: new USB bus registered, assigned bus number 1
Dec 21 09:25:59 stazione kernel: [   23.316624] mmc0: host does not support reading read-only switch. assuming write-enable.
Dec 21 09:25:59 stazione kernel: [   23.325179] mmc0: new SD card at address 942f
Dec 21 09:25:59 stazione kernel: [   23.342184] orion-ehci orion-ehci.0: irq 19, io mem 0xf1050000
Dec 21 09:25:59 stazione kernel: [   23.351271] mmcblk0: mmc0:942f SD02G 1.84 GiB
Dec 21 09:25:59 stazione kernel: [   23.355891]  mmcblk0: p1 p2 p3 < p5 >
Dec 21 09:25:59 stazione kernel: [   23.371127] orion-ehci orion-ehci.0: USB 2.0 started, EHCI 1.00
Dec 21 09:25:59 stazione kernel: [   23.382226] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
Dec 21 09:25:59 stazione kernel: [   23.389054] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Dec 21 09:25:59 stazione kernel: [   23.396344] usb usb1: Product: Marvell Orion EHCI
Dec 21 09:25:59 stazione kernel: [   23.401080] usb usb1: Manufacturer: Linux 2.6.32-5-kirkwood ehci_hcd
Dec 21 09:25:59 stazione kernel: [   23.407460] usb usb1: SerialNumber: orion-ehci.0
Dec 21 09:25:59 stazione kernel: [   23.415648] usb usb1: configuration #1 chosen from 1 choice
Dec 21 09:25:59 stazione kernel: [   23.421909] hub 1-0:1.0: USB hub found
Dec 21 09:25:59 stazione kernel: [   23.425860] hub 1-0:1.0: 1 port detected
Dec 21 09:25:59 stazione kernel: [   23.691303] kjournald starting.  Commit interval 5 seconds
Dec 21 09:25:59 stazione kernel: [   23.696836] EXT3-fs: mounted filesystem with ordered data mode.
Dec 21 09:25:59 stazione kernel: [   23.741068] usb 1-1: new high speed USB device using orion-ehci and address 2
Dec 21 09:25:59 stazione kernel: [   23.902474] usb 1-1: New USB device found, idVendor=05e3, idProduct=0608
Dec 21 09:25:59 stazione kernel: [   23.909218] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
Dec 21 09:25:59 stazione kernel: [   23.916401] usb 1-1: Product: USB2.0 Hub
Dec 21 09:25:59 stazione kernel: [   23.920890] usb 1-1: configuration #1 chosen from 1 choice
Dec 21 09:25:59 stazione kernel: [   23.927235] hub 1-1:1.0: USB hub found
Dec 21 09:25:59 stazione kernel: [   23.931341] hub 1-1:1.0: 4 ports detected
Dec 21 09:25:59 stazione kernel: [   24.211760] usb 1-1.1: new high speed USB device using orion-ehci and address 3
Dec 21 09:25:59 stazione kernel: [   24.332219] usb 1-1.1: New USB device found, idVendor=14cd, idProduct=127b
Dec 21 09:25:59 stazione kernel: [   24.339143] usb 1-1.1: New USB device strings: Mfr=1, Product=3, SerialNumber=2
Dec 21 09:25:59 stazione kernel: [   24.346504] usb 1-1.1: Product: Mass Storage Device
Dec 21 09:25:59 stazione kernel: [   24.351437] usb 1-1.1: Manufacturer: Generic
Dec 21 09:25:59 stazione kernel: [   24.355727] usb 1-1.1: SerialNumber: 127B20090522
Dec 21 09:25:59 stazione kernel: [   24.361941] usb 1-1.1: configuration #1 chosen from 1 choice
Dec 21 09:25:59 stazione kernel: [   24.441399] usb 1-1.4: new full speed USB device using orion-ehci and address 4
Dec 21 09:25:59 stazione kernel: [   24.553227] usb 1-1.4: New USB device found, idVendor=10c4, idProduct=ea60
Dec 21 09:25:59 stazione kernel: [   24.560152] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Dec 21 09:25:59 stazione kernel: [   24.567526] usb 1-1.4: Product: CP2102 USB to UART Bridge Controller
Dec 21 09:25:59 stazione kernel: [   24.573949] usb 1-1.4: Manufacturer: Silicon Labs
Dec 21 09:25:59 stazione kernel: [   24.578671] usb 1-1.4: SerialNumber: 0001
Dec 21 09:25:59 stazione kernel: [   24.589025] udev[164]: starting version 164
Dec 21 09:25:59 stazione kernel: [   24.615161] usb 1-1.4: configuration #1 chosen from 1 choice
Dec 21 09:25:59 stazione kernel: [   24.807993] usbcore: registered new interface driver usbserial
Dec 21 09:25:59 stazione kernel: [   24.923762] USB Serial support registered for generic
Dec 21 09:25:59 stazione kernel: [   24.991597] usbcore: registered new interface driver usbserial_generic
Dec 21 09:25:59 stazione kernel: [   24.998167] usbserial: USB Serial Driver core
Dec 21 09:25:59 stazione kernel: [   25.051989] USB Serial support registered for cp210x
Dec 21 09:25:59 stazione kernel: [   25.078123] cp210x 1-1.4:1.0: cp210x converter detected
Dec 21 09:25:59 stazione kernel: [   25.161372] usb 1-1.4: reset full speed USB device using orion-ehci and address 4
Dec 21 09:25:59 stazione kernel: [   25.272593] usb 1-1.4: cp210x converter now attached to ttyUSB0
Dec 21 09:25:59 stazione kernel: [   25.278605] usbcore: registered new interface driver cp210x
Dec 21 09:25:59 stazione kernel: [   25.284231] cp210x: v0.09:Silicon Labs CP210x RS232 serial adaptor driver
Dec 21 09:25:59 stazione kernel: [   25.437100] SCSI subsystem initialized
Dec 21 09:25:59 stazione kernel: [   25.488019] Initializing USB Mass Storage driver...
Dec 21 09:25:59 stazione kernel: [   25.497053] scsi0 : SCSI emulation for USB Mass Storage devices
Dec 21 09:25:59 stazione kernel: [   25.507100] usbcore: registered new interface driver usb-storage
Dec 21 09:25:59 stazione kernel: [   25.515923] usb-storage: device found at 3
Dec 21 09:25:59 stazione kernel: [   25.515932] usb-storage: waiting for device to settle before scanning
Dec 21 09:25:59 stazione kernel: [   25.515967] USB Mass Storage support registered.
Dec 21 09:25:59 stazione kernel: [   25.713593] uncorrectable error :
Dec 21 09:25:59 stazione kernel: [   25.716839] uncorrectable error :
Dec 21 09:25:59 stazione kernel: [   25.720261] end_request: I/O error, dev mtdblock0, sector 0
Dec 21 09:25:59 stazione kernel: [   25.726043] Buffer I/O error on device mtdblock0, logical block 0
Dec 21 09:25:59 stazione kernel: [   25.732321] uncorrectable error :
Dec 21 09:25:59 stazione kernel: [   25.735561] uncorrectable error :
Dec 21 09:25:59 stazione kernel: [   25.738982] end_request: I/O error, dev mtdblock0, sector 0
Dec 21 09:25:59 stazione kernel: [   25.744763] Buffer I/O error on device mtdblock0, logical block 0
Dec 21 09:25:59 stazione kernel: [   25.751146] uncorrectable error :
Dec 21 09:25:59 stazione kernel: [   25.754387] uncorrectable error :
Dec 21 09:25:59 stazione kernel: [   25.757809] end_request: I/O error, dev mtdblock0, sector 0
Dec 21 09:25:59 stazione kernel: [   25.763590] Buffer I/O error on device mtdblock0, logical block 0
Dec 21 09:25:59 stazione kernel: [   25.769835] uncorrectable error :


Same type of errors. They began to appear after I changed the filesystem of my SD card. No idea if it is bad or not. The sheeva runs normally and the boot from SD (debian) is normal. I would try a fresh installation to see if something changes. It seems NAND related though.
I'm trying furthermore a lot of SD carsd of every possible firm.
Logged
Pages: [1]
  Print  
« previous next »
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.16 | SMF © 2011, Simple Machines Valid XHTML 1.0! Valid CSS!