I have had the privilege of trying this one out and even taking apart to photograph.
The Dreamplug is certainly based on the Guruplug Server Plus but has brand new board layout, large heatsink, no fan and digital Audio.
I have tested the new Audio playing an internet radio broadcast on Rythmbox whilst performing a package install with synaptic and quality sounded perfect through my PC speakers.
This will be much easier to Bespoke plug configurations restricted by the size of MicroSD you want to install.
The supplied MicroSD has a 50MB Fat partition for the Kernel and the rest formatted as ext3.
I tried a Guiplug with a similar partition configuration and it booted with no change required to the uboot variables.
Booting a rootfs from and SD was no problem with a couple of changes to uboot variables.
I did notice that it failed to boot with sheeva.with-linux.com kernels beyond 220.127.116.11.
It seems quite happy to use the standard Jtag units that work with the Guruplug.
We are awaiting a confirmed delivery date for our first batch from Globalscale, early indications are late March, and we will be taking Pre orders in February.
Internal MicroSD visible on the separate board and No Nand.
A standard Jtag is attached and works fine with the Dreamplug.
Notice the inserted SD card which does not protrude.
Power Supply connected via cable.
Underside of Board
Underside of case showing wall Mounting points.
Metal Heatsink fitted into case.
Dreamplug running the NewIT Guiplug software and powering the iMo Monster from the USB.